Please select your page
Momentary Floor Protection - A Product Guide

Momentary Floor Protection - A Product Guide

Your floors want particular protection when undergoing remodeling, throughout new development, moving heavy furniture or equipment, and for other events beyond day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can value 1000's of dollars in replacement and repair costs. This article describes surface protection products for floors to be able to make knowledgeable choices on the most effective product to use on your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These embrace common adhesive films, rolled paper products and rolled textile protection. Protective materials purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick up to forty eight mils thick).

(2) Products by the sheet: These embody corrugated plastic, masonite, and different inflexible protection. Protective materials bought by the sheet are commonly measured in thickness by the inch (e.g., 1/four-inch thick) and usually come as four toes by 8 feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces however does not work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable in order that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to safe them to flooring and tapes can typically go away adhesive residue when removed. Frequent paper protection products include:

· A coated compressed paper board 38 mils thick that's breathable, waterproof and made from recycled paper.

· Kraft paper is a lightweight brown paper that's cheap but doesn't afford any impact protection and might simply tear

· Scrim paper might incorporate coatings or reinforcements to make them water-resistant as well as scrim threads to strengthen the paper and stop tearing. These improved papers are longer lasting than common Kraft paper or rosin paper however they are also too thin to supply much impact protection.

· Rosin paper is thicker than Kraft paper and could be very low cost. Rosin paper is recycled, felt paper that ranges from 9.0 to 11.5 mils thick. The massive drawback of utilizing Rosin paper is that it might cause a permanent stain if the paper gets wet. Rosin paper also can rip simply so it not normally really helpful to be used

· Corrugated cardboard rolls or sheets can also be used to protect flooring. Corrugate provides impact protection nevertheless it shouldn't be coated with a water resistant end and must be kept dry at all times so that it doesn't disintegrate. Cardboard products are also available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films varying from 2.0 up to 3.5 mils in thickness. They trap any moisture from escaping so that they should not be used on any floors which might be curing. Two of the great benefits of polyethylene films are that films will flex and contour so they can be used on carpets as well as hard surfaces. These films do not offer any impact protection and are normally rated for brief term use of 30 to 90 days only. Polyethylene films are designed for one-time use and do not use recycled materials making them a poor alternative in sustainable protection. Protection films are available in quite a lot of adhesion "tack". Hard surface protection films may have a lower tack and coloration than carpet protection which wants a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with a lot of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an actual sheet of thin wood. Both plywood and Masonite are sold in the usual size of 4 ft by 8 feet and are more costly per square foot than paper or polyethylene products. Masonite is commonly 1/eight or 1/four inch thick. Plywood is commonly 1/4 inch to 3/four inch thick. Both products provide impact protection on a variety of floor types and provide adequate protection towards heavy equipment use or furniture moving. Each plywood and Masonite are breathable and reusable however they are bulky to carry and store. These wood sheets ought to be used on top of a softer protection similar to a rolled textile as they simply scratch flooring. These sheets work well to protect carpet as they prevent wrinkles when rolling heavy loads over the carpet. Plywood and Masonite do not provide moisture protection and may be harder to cut to measurement than different protection types.

If you have any queries regarding where and how to use correx roll, you can call us at our own web page.